Technical specifications

Engine type

Aprilia longitudinal 65° V-4 cylinder, 4-stroke, liquid cooling system, double overhead camshafts (DOHC), four valves per cylinder

Bore x stroke

78 x 52.3 mm

Total engine capacity

999.6 cc

Compression ratio

13:1 

Maximum power at crankshaft

180 CV (132.4 kW) at 12,500 rpm

Maximum torque at crankshaft

115 Nm at 10,000 rpm

Fuel system

Airbox with front dynamic air intakes.
4 Weber-Marelli 48-mm throttle bodies with 8 injectors and latest generation Ride-by-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion: T (Track), S (Sport), R (Road)

Ignition

Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and “stick-coil”-type coils

Exhaust system

4 into 2 into 1 layout, single lambda probe, lateral single silencer with engine control unit-controlled butterfly valve and integrated trivalent catalytic converter (Euro 3)

Lubrication

Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)

Clutch

Multi-disc oil-bath, with mechanical slipper system

Frame

Aluminium dual spar frame with cast and pressed elements.
Sachs steering damper

Front suspension

Upside-down Showa fork with Æ 43 mm stanchions. Aluminium radial calliper mounts. Completely adjustable spring preload and hydraulic compression and rebound damping. Wheel travel 120 mm

Rear suspension

Double braced aluminium swingarm; mixed low thickness and sheet casting technology.
Sachs piggy back monoshock with completely adjustable: spring preload, wheelbase, hydraulic compression and rebound damping. APS progressive linkage. Wheel travel 130 mm

Brakes

Front: Dual 320-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo monobloc radial callipers with 4 Æ 34-mm opposite. Sintered pads. Radial pump and metal braided brake hose

Rear: 220-mm diameter disc; Brembo calliper with two Æ 32 mm isolated pistons. Sintered pads. Pump with integrated tank and metal braided hose

Rims

Front: Aluminium alloy with 6 split spokes - 3.5”X17”
Rear: Aluminium alloy with 5 split spokes - 6”X17”

Tyres

Radial tubeless.
Front: 120/70 ZR 17
Rear: 190/55 ZR 17 (alternative: 190/50 ZR 17)

Dimensions

Max. length: 2040 mm
Max. width: 735 mm (at the handlebar)
Max. height: 1120 mm
Min. height from the ground: 130 mm
Saddle height: 845 mm
Centre to centre distance: 1420 mm
Trail: 105 mm
Steering angle: 24.5°

Kerb weight

184 kg *

Tank

17 litres (4-litre reserve included)