APRILIA RSV4 FACTORY: Technical Specifications

Engine type

Aprilia longitudinal 65° V-4 cylinder, 4-stroke, liquid cooling system, double overhead camshafts (DOHC), four valves per cylinder

Fuel

Unleaded gasoline

Bore and stroke

78 x 52.3 mm

Total engine capacity

999.6 cc

Compression ratio

13:1 

Maximum power at crankshaft

180 CV (132.4 kW) at 12,500 rpm

Maximum torque at crankshaft

115 Nm at 10,000 rpm

Induction and fuel system

Airbox with front dynamic air intakes. Variable length intake ducts controlled via ECU.

4 Weber-Marelli 48-mm throttle bodies with 8 injectors and latest generation Ride-by-Wire engine management.

Choice of three different engine maps selecby the rider with bike in motion

Track

Sport

Road

Ignition

Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and "stick-coil"-type coils

Starter

Electric

Exhaust system

4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with engine control unit-controlled butterfly valve and integrated trivalent catalytic converter (Euro 3)

Alternator

Flywheel mounted 420W alternator with rare earth magnets

Lubrication

Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)

Gearbox

6-speed cassette type gearbox

1st: 39/15 (2.6)

2nd: 33/16 (2,063)

3rd: 34/20 (1.7)

4th: 32/22 (1,455)

5th: 34/26 (1,308)

6th: 33/27 (1,222)

Clutch

Multi-disc oil-bath, with mechanical slipper system

Primary drive

Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659)

Secondary drive

Chain: Drive ratio: 40/16 (2,5)

Chassis

Twin-spar adjusaluminium frame, with castings and pressings. Envisaged adjustments:

·headstock position and rake

·engine height

·swingarm pin height

Öhlins adjussteering dumper

Front suspension

Öhlins Racing upside-down fork, 43-mm stanchions (with Tin surface treatment). Low profile forged aluminium radial caliper mountings. Completely adjusspring preload and hydraulic compression and rebound damping. Wheel travel: 120 mm

Rear suspension

Twin sided aluminium swingarm; mixed low thickness and sheet casting technology.

Öhlins Racing monoshock with piggyback with completely adjus: spring preload, wheelbase and hydraulic compression and rebound damping. APS progressive linkages. Wheel travel: 130 mm

Brakes

Front: Dual 320-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo monobloc radial callipers with 4 34-mm opposite. Sintered pads. Radial pump and metal braided brake hose

Rear: 220-mm diameter disc; Brembo floating caliper with two 32-mm isolated pistons. Sintered pads. Pump with integrated tank and metal braided hose

Rims

Aprilia forged aluminium alloy rims, completely machined, 5 split spokes.

Front:3.5"X17"

Rear: 6"X17"

Tyres

Radial tubeless.

Front: 120/70 ZR 17

Rear: 190/55 ZR 17 (alternative: 190/50 ZR 17)

Dimensions (default settings)

Max. length: 2040 mm

Max. width: 735 mm (at the handlebar)

Max. height: 1120 mm

Min. height from the ground: 130 mm

Saddle height: 845 mm

Centre to centre distance: 1420 mm

Trail: 105 mm

Steering angle: 24.5°

Kerb weight

179 kg *

Tank

17 litres (4-litre reserve included)

*Dry weight, without battery and fluids.